To answer some of the questions about wheel spacers......

We have most manufactures wheel spacers available, Honda, Yamaha, Kawasaki, Polaris, Arctic Cat, Can Am etc.
We even make wheel adapters/ spacers.

Our thoughts...
We make 1 inch, 1inch and 1/2 , and 2 inch spacers. We believe any more than 2 inches of spacers just puts to much stress on the outer wheel bearnings and to much unsprung wheel weight.

The adapters are great if you want to run a more common wheel with more variety of styles. For example the 4/110 is a very common bolt pattern and whell manufactures make a lot more wheel styles available for that bolt pattern than say 4/137.

Wheel spacers are great when you add aftermarket tires and wheels and you need the extra clearence so the tire dosnt rub on the steering componates or springs under hard turns. If your tires are rubbing on the top of the fenders under full suspension compression then you probably need a lift kit for that clearence issue.

Wheel spacers also add a lot of stability to your ATV / UTV and can be removed quickly.
Our spacers are machined from billet 6061 Aluminum, not plastic or cast materials that can fail, and with all parts always use threadlocker to keep the bolts tight, and check at regular intervals.